![[{[item.product.name]}]]([{[item.product.photo.url]}] 75w)
Set: 12x Low-Expansion Foam – Efficient Sealing and Insulation
The low-expansion foam in this set is designed for precise and efficient sealing, filling, and insulating applications, ensuring professional results for construction and renovation projects.
Applications:
- Filling voids, cracks, gaps, and pipe penetrations
- Sealing during window installation
- Sealing during door installation
- Sealing roof, wall, and ceiling joints
- Providing thermal insulation
- Providing acoustic insulation
Key Features:
- High Yield: Up to 45 liters of foam per can
- Fast Drying:
- Skin formation in ~10 minutes
- Full cure in ~40 minutes (depending on humidity)
- Flexible Foam: Provides durable and elastic seals
- Low Expansion Rate: Prevents overfilling and reduces waste
- Strong Adhesion: Adheres to a wide variety of surfaces
- Can Volume: 750 ml
Usage Instructions:
-
Prepare the Surface:
- Clean and degrease the working area.
- Dampen the surface with water if applying above 0°C.
- Protect adjacent surfaces to prevent accidental foam contact.
-
Prepare the Product:
- Warm cold cans to room temperature by placing them in warm water (max +30°C) or leaving them in a warm area for 24 hours.
- Ensure the applicator and can are at the same temperature.
-
Application Process:
- Wear protective gloves.
- Shake the can vigorously (10–20 seconds, valve down) to mix the contents.
- Attach the can securely to the foam applicator.
- Hold the can upside down during application.
- Fill vertical gaps from the bottom up without overfilling—foam will expand.
- For gaps wider than 3 cm, apply foam in a zigzag pattern. Do not use for gaps wider than 5 cm.
-
Pausing and Cleaning:
- For breaks longer than 5 minutes, clean the applicator nozzle and valve with polyurethane foam cleaner.
- Shake the can before resuming application.
This 12-can set of low-expansion foam is an essential tool for professionals and DIY enthusiasts, ensuring reliable, durable, and efficient sealing for various construction and insulation tasks.
Safety Information
General Safety Guidelines:Store only in the original packaging.Keep out of reach of children.Do not use before reading and understanding all safety precautions.Wash hands during breaks and after work.Immediately remove and wash contaminated clothing before reuse.Conduct a test application before use.Store the foam canister at room temperature for at least 12 hours before application.The applicator's temperature should not be lower than the canister's temperature.Handling and Storage:Keep away from heat, hot surfaces, sparks, open flames, and flammable materials.Do not smoke or use near open flames or other ignition sources.Do not inhale vapors.Avoid contact during pregnancy and breastfeeding.Do not puncture or burn the canister, even after use.Do not touch or walk through spilled material.Clean spills immediately, avoiding eating, drinking, or smoking during cleanup.Store at an optimal temperature of +5°C to +23°C.Avoid contact with skin and eyes.First Aid:In case of injury or ingestion, seek medical attention immediately.Wear protective gloves, a face mask, and eye protection during use.Avoid contact with water until the foam has cured.Dispose of the product in designated recycling containers.Usage Precautions:Do not stand on the product.Avoid using on polyethylene (PE), polypropylene (PP), Teflon, or bituminous surfaces.Not suitable for surfaces constantly exposed to water.Always use mechanical fasteners for mounting doors and windows to prevent deformation.Protect canisters from heat, overheating, and direct sunlight.The curing process depends on environmental temperature and humidity. A drop below the minimum application temperature within 24 hours may affect seal quality.Premature handling of foam can lead to irreversible changes in its structure and performance.Disposal and Maintenance:Opened cans of foam and adhesive should be used within 1 week.Fresh foam should be removed with a polyurethane foam cleaner.Cured foam and adhesive can only be removed mechanically (e.g., using a knife).Products containing solvents may damage styrofoam boards.Manufacturer Information:
BAUHUS ODDZIAŁ POLSKA Sp. z o.o.
ul. Bolesława Chrobrego 62
Toruń, 87-100
Poland
Phone: +48 720 797 308
Email: bauhus@bauhus.pl
